ODYSSEUS Common Rail High-Pressure Pumps
The high-pressure pumps from the HDP-K range feature a unique crank mechanism. They offer the greatest possible efficiency and resilience and are ideally suited to the requirements of harsh industrial environments. The special design aims to minimise the wear on pumps and pistons. As such, HDP-K high-pressure pumps ensure efficient operation whilst requiring little maintenance.
- Robust design
- Long service life
- Available with or without pre-feed pump
- Lubrication provided by the engine oil circuit
- Unique crank mechanism
- Simple to maintain
ODYSSEUS Common Rail Injectors
The new generation of ICR-DS injectors has been designed to eliminate static leakage, and reduces the return flow of fuel by 75 % compared to conventional injectors. By integrating the accumulator volume, pressure peaks inside the injector are reduced by 25 %. This produces a uniform, consistent flow of fuel, which is crucial for operation with heavy oil in particular.
- High performance
- Fast response
- Compact design
ODYSSEUS Common Rail Pressure Limiting Valves
Pressure-limiting valves for protecting common rail systems against excess pressure; with fast-switching action for rapidly reducing the pressure.
CR Injector ICR-DS-100
Medium injector for engines with a cylinder output of up to 100 kW. Injection pressure of up to 2,200 bar, injection quantity from 10 to 500 mm3 per injection process. Suitable for distilled diesel fuels.
CR Injector ICR-DS-200
Medium injector for engines with a cylinder output of up to 200 kW. Injection pressure of up to 2,500 bar, injection quantity from 50 to 2,500 mm3 per injection process. Suitable for distilled diesel fuels.
CR Injector ICR-DS-300
Large injector for engines with a cylinder output of up to 300 kW. Injection pressure of up to 2,200 bar, injection quantity from 50 to 4,000 mm3 per injection process. Suitable for operation with heavy oil.
CR Injector ICR-DS-500
Large injector for engines with a cylinder output of up to 500 kW. Injection pressure of up to 2,200 bar, injection quantity from 70 to 9,000 mm3 per injection process. Suitable for operation with heavy oil.
CR Injector ICR-DS-1000
Large injector for engines with a cylinder output of up to 1,250 kW. Injection pressure of up to 2,400 bar, injection quantity from 150 to 14,000 mm3 per injection process. Suitable for operation with heavy oil.
- Cooled nozzle
- Sealed and cooled control fitting that does not make contact with the fuel
- Integrated accumulator volume; no pressure accumulator required
- Built-in flow limiter