For more than 100 years, HEINZMANN has been developing and producing extremely efficient actuators with different power levels and modes of operation, covering all areas of application. Our renowned electrical and hydraulic actuators can be easily installed in any type of engine and are suitable for use as original equipment or for retrofits.

ALLOCATION TABLE actuators / corresponding speed governors

  • Rotary Actuators with Gearing
  • StG 6 / StG 10
  • StG 16 / StG 30 / StG 40
  • STG 30.90 / 40.90
  • StG 64 / StG 90
  • StG 180

Electric Actuators

Rotary Actuators with Gearing
The range of electrically driven actuators with gearing is based on a DC disc motor, which has been combined with a gear mechanism. These actuators provide a nominal torque of 4 Nm to 180 Nm and a control angle of 36° or 42°. They are used in medium-sized and large diesel and gas engines, as well as gas and steam turbines. The actuators can be combined with various analogue or digital HEINZMANN governors and provide contactless position feedback.

Serie Actuatoren Elektrisch mitMotor

  • Tried-and-tested
  • Reliable
  • Long service life

StG 6 / StG 10

These actuators are mainly used in industrial engines. They are driven by analogue or digital HEINZMANN governors or by the JANUS positioning module.

Technical data

  • TorqueMAX: 6 / 10 Nm
  • Rotation: 36°
  • Response time: 75 / 60 ms
  • Feedback: analogue

Engine Types & Applications

Diesel EnginesDiesel Engines

Gas EnginesGas Engines

StG 16 / StG 30 / StG 40

These actuators are combined with analogue or digital governors or the HEINZMANN JANUS positioning module. They are mainly used in industrial engines.

Technical data

  • TorqueMAX: 15 / 31,5 / 44 Nm
  • Rotation: 42°
  • Response time: 120 / 190 / 190 ms
  • Feedback: analogue

Engine Types & Applications

Diesel EnginesDiesel Engines

Gas EnginesGas Engines

TurbinesTurbines

STG 30.90 / 40.90

StG 30.90 and StG 40.90 are robust and durable actuators with rotation angle up to 90°. Equipped with a DC disc motor combined with a two-stage gear they provide considerable torque

Technical data

  • TorqueMAX: 31.5 / 44 Nm
  • Rotation: 90°

Engine Types & Applications

Diesel EnginesDiesel Engines

Gas EnginesGas Engines

Dual-Fuel EnginesDual-Fuel Engines

CHPCHP

GensetsGensets

Industrial VehiclesIndustrial Vehicles

LocomotivesLocomotives

Pump DrivesPump Drives

ShipsShips

StG 64 / StG 90

These powerful actuators have proven their worth in industrial engines and turbines and work together with digital HEINZMANN governors.

Technical data

  • TorqueMAX: 64 / 90 Nm
  • Rotation: 42°
  • Response time: 270 / 320 ms
  • Feedback: analogue

Engine Types & Applications

Diesel EnginesDiesel Engines

Gas EnginesGas Engines

TurbinesTurbines

StG 180

This extremely powerful actuator is ideal for both industrial engines and for turbines and is driven by digital HEINZMANN governors.

Technical data

  • TorqueMAX: 180 Nm
  • Rotation: 42°
  • Response time: 320 ms
  • Feedback: analogue

Engine Types & Applications

Diesel EnginesDiesel Engines

Gas EnginesGas Engines

TurbinesTurbines

  • Direct Acting Rotary Actuators
  • StG 3005 / StG 3010
  • StG 3 / StG 3+
  • StG 1 / StG 2
  • StG 2010 / 2040 / 2080
  • StG 2005 DP / 2040 DP
  • StG 2120

Electric Actuators

  Direct Acting Rotary Actuators

This is a range of direct-acting actuators with a rotating shaft and an all-electric drive concept. The torque varies from 0.55 to 13 Nm at a maximum control angle of 36°, 53°, 68° or 70°. They are primarily used for diesel and gas engines with outputs from 100 to 1,000 kW in vehicles and in industry, and can be combined with various analogue and digital HEINZMANN governors.

Reihe Aktuatoren 1

  • Compact design
  • Dynamic power delivery
  • Contactless position feedback

StG 3005 / StG 3010

These affordable actuators have been developed for direct installation on small diesel and gas engines. They are suitable for use with the analogue ORION AC 3 or the digital ORION DC 9 HEINZMANN governors.

Technical data

  • TorqueMAX: 0.3 - 0.6 Nm
  • Rotation: 50-53°
  • Response time: 70 ms
  • Feedback: digital

More information

Manual

Corresponding Governors

 

Engine Types & Applications

Diesel EnginesDiesel Engines

Gas EnginesGas Engines

StG 3 / StG 3+

These powerful and robust actuators are mainly used in small and medium-sized diesel and gas engines or turbines. They differ in their maximum torque and their operating temperature range. The actuators can be used in the harshest ambient conditions and at ambient temperatures of up to 150 °C.

Technical data

  • TorqueMAX: 3 Nm | 6 Nm
  • Rotation: 72°
  • Response time: less than 40 ms
  • Feedback: analogue

Engine Types & Applications

Diesel EnginesDiesel Engines

Gas EnginesGas Engines

Gas TurbinesGas Turbines

Steam TurbinesSteam Turbines

StG 1 / StG 2

These actuators are available as spare parts and used in industrial engines producing less than 180 kW. They are driven by analogue governors. Follow-up products are actuators of the 2000 series.

Technical data

  • TorqueMAX: 0.9 - 1.4 Nm
  • Rotation: 68°
  • Response time: 40 ms
  • Feedback: analogue

Engine Types & Applications

Diesel EngineDiesel Engine

Gas EnginesGas Engines

StG 2010 / 2040 / 2080

These models are the most powerful versions in the 2000 actuator range, and can be driven by analogue and digital HEINZMANN governors and by positioning modules. They are used in diesel, gas and dual-fuel engines and can be integrated with various throttle valves for hot and cold engine applications. The brushless permanent magnet system makes this actuator series ideal for use with gas engines.

Technical data

  • TorqueMAX: 0.8 / 2 / 7.4 / 11 Nm
  • Rotation: 36° or 68°
  • Response time: 40 ... 85 ms
  • Feedback: analogue

Engine Types & Applications

Diesel EnginesDiesel Engines

Gas EnginesGas Engines

Dual-Fuel EnginesDual-Fuel Engines

StG 2005 DP / 2040 DP

The DP versions of our actuators have been designed for direct installation on conventional diesel injection pumps, and are driven by HEINZMANN digital governors. They are mainly used in industrial engines producing 100 to 1000 kW. They are primarily used to replace mechanical governors in diesel and dual-fuel engines, allowing them to benefit from the additional functions provided by electronic governors.

Technical data

  • TorqueMAX: 0.8 / 5.6 Nm
  • Rotation: 32° or 36°
  • Response time: 50 ms
  • Feedback: digital

Mote informationen

Manuals

Corresponding Governors

 

Engine Types & Applications

Diesel EnginesDiesel Engines

Industrial vehiclesIndustrial vehicles

StG 2120

The StG 2120 is tailored to engine and turbine applications and their specific ambient conditions, and is controlled by HEINZMANN digital governors or HEINZMANN positioning modules. Its higher explosion protection class makes it ideal for use in gas turbines and gas engines that are subject to more stringent requirements.

Technical data

  • TorqueMAX: 13 Nm
  • Rotation: 68°
  • Response time: 100 ms
  • Feedback: analogue

Engine Types & Applications

TurbinesTurbines

  • Linear Actuators
  • LA 25 / LA 30 / LA 35

Electric Actuators

Linear Actuators
This range of direct-acting actuators features an all-electric drive concept and has been developed for direct installation in diesel in-line injection pumps. It comes with special contactless position feedback. The linear actuators are actuated by the KG-LC-D / AC 3 analogue control unit or a range of digital control units, e.g. the DC 7, DC 9, DC 10 or DC 12.

Linear Actuator LA 25

  • Suitable for small diesel or gas engines
  • Robust design
  • No maintenance required

LA 25 / LA 30 / LA 35

Technical data

  • Force MAX: 25 / 30 / 35 N
  • Operating range: 19.5 / 15.5 / 12.5 mm

Engine Types & Applications

Diesel EnginesDiesel Engines

Gas EnginesGas Engines

Industrial VehiclesIndustrial Vehicles

  • Hydraulic Actuators
  • RE Series 20
  • RE 2221-1G
  • RE 2231-1GH
  • RE 2800-1G
  • RE 2222-3G
  • RE 2232-3G
  • RE 2223-3G
  • RE 2233-1G

Hydraulic Actuators

The range of hydraulic actuators offered by REGULATEURS EUROPA in the HEINZMANN portfolio is built on nearly seventy years of expertise in hydraulic governing. Customers in the industrial, marine and rail traction sector acknowledge these actuators for high reliability and durability along with excellent performance.
All models are designed to be controlled by digital controllers VIKING35, DC 8 or XIOS. Alternatively, they can interface with other controllers as part of a customised engine management system by REGULATEURS EUROPA

Reihe Aktuatoren hydaulisch

  • Excellent control management
  • Reliability
  • Endurance

RE Series 20

Small proportional actuator using engine oil for its operation but with a self-contained oil pump and accumulator. Can be used with a range of proprietary ECUs, making it an ideal solution for upgrade/retrofit installations.

Technical data

  • Output range ft lbf: 4.7
  • Output range Nm: 6

More information

Technical Drawing

Data sheet

Engine Types & Applications

Small Diesel EnginesSmall Diesel Engines

Gas EnginesGas Engines

GensetsGensets

RE 2221-1G

The 2221 is a proportional actuator where the position of the output shaft is proportional to the electrical input signal 0-1 A. This actuator is typically used in medium/high-speed diesel engines in generator systems or locomotives.

Technical data

  • Output range ft lbf: 8, 12, 15, 25, 34
  • Output range Nm: 11, 16, 20, 34, 46, 54

More information

Data Sheet

Engine Types & Applications

Diesel EnginesDiesel Engines

GensetsGensets

LocomotivesLocomotives

Steam TurbinesSteam Turbines

RE 2231-1GH

Proportional actuator featuring a mechanical-hydraulic governor as a ballhead backup in the case of a power failure or controller fault, providing various manual speed setting options. Popular actuator model for marine propulsion engines and other applications where common mode failures must be minimised.

Technical data

  • Output range ft lbf: 8, 12, 15, 25, 34, 40
  • Output range Nm: 11, 16, 20, 34, 46, 54

More information

Data sheet

Engine Types & Applications

Diesel EnginesDiesel Engines

ShipsShips

GensetsGensets

RE 2800-1G

This model is a compact hydraulic proportional actuator used in combination with the Viking range from RE or governors from other manufacturers. It is completely interchangeable with actuators from the UG range.

Technical data

  • Output range ft lbf: 30
  • Output range in Nm: 42

More information

Technical Drawing

Data sheet

Engine Types & Applications

Diesel enginesDiesel engines

GensetsGensets

Industrial PlantsIndustrial Plants

RE 2222-3G

Proportional actuator featuring a two-stage, high stiffness, backlash-free hydraulic servo mechanism for best possible control on larger engines requiring increased work outputs. Option for start/boost pressure fuel limiter and/or a mechanical-hydraulic governor as a ballhead backup.

Technical data

  • Output range ft lbf: 60, 80
  • Output range Nm: 81, 108

More information

Data Sheet

Engine Types & Applications

Diesel EnginesDiesel Engines

GensetsGensets

ShipsShips

RE 2232-3G

Proportional actuator featuring a two-stage, high stiffness, backlash-free hydraulic servo mechanism for best possible control on larger engines requiring increased work outputs. Option for start/boost pressure fuel limiter and/or a mechanical-hydraulic governor as a ballhead backup.

Technical data

  • Leistungsbereich in ft lbf: 60, 80
  • Leistungsbereich in Nm: 81, 108

Engine Types & Applications

DieselmotorenDieselmotoren

GensetsGensets

SchiffsantriebeSchiffsantriebe

RE 2223-3G

Proportional actuator featuring a two-stage, high stiffness, backlash free hydraulic servo mechanism for best possible control on large medium-speed engines. ption for start/boost pressure fuel limiter and/or a mechanical hydraulic governor as a ballhead backup.

Technical data

  • Output range ft lbf: 120, 200, 250
  • Output range Nm: 163, 271, 339

 

 

Engine Types & Applications

Diesel EnginesDiesel Engines

GensetsGensets

ShipsShips

RE 2233-1G

Proportional actuator featuring a two-stage, high stiffness, backlash free hydraulic servo mechanism for best possible control on large medium-speed engines. ption for start/boost pressure fuel limiter and/or a mechanical hydraulic governor as a ballhead backup.

Technical data

  • Output range ft lbf: 120, 200, 250
  • Output range Nm: 163, 271, 339

 

 

Engine Types & Applications

Diesel EnginesDiesel Engines

GensetsGensets

ShipsShips

We use cookies on our website. However, non-essential cookies (e.g. tracking cookies) are only set if you consent to their use. We point out that in connection with these cookies, your personal data may be transferred to US service providers and merged with other personal data. In the case of data transfers to the USA, there is a risk that this data will be accessed by US authorities without notification and without any legal remedy. With your consent, you also agree to this data transfers to the USA. For more information on the cookies we use, their purposes and storage periods, please refer to our privacy notice at: www.heinzmann.com/en/privacy-policy.